PERFORMANCE SOUND & HEAT DEADENER FOIL TOP / BUTYL BACK PEEL AND STICK - 50 SQUARE FEET, INCLUDES APPLICATION ROLLER
Viscoelastic sound deadener with a butyl based adhesive. With an aluminum constraining layer and an unique composition it has been proven to be extremely efficient to adhere to a contoured panel. It can be installed anywhere including under hood. Comes 1 foot wide and is available in 50 sq. ft. rolls.
COLOR: Black Butyl with Aluminum Foil Outer Skin WEIGHT: Approx. 0.29 pounds per square foot THICKNESS: 45 MIL, 1.15 mm, ( 0.045" ) WIDTH OF SHEET: 305 mm ( 12" ) TEMPERATURE RANGE: -55C to +110C (-67F to +230F)
APPLICATIONS : CP1 - PERFORMANCE SOUND & HEAT DEADENER is used to treat metal floors, panels, partitions, ducts, doors, and so forth in Muscle Cars & Hot Rods. It can also be used for ventilation ducts, relay cabinets, steel furniture, home appliances, sink units, computer equipment, machine tools and many other objects that suffer from vibration-produced noise.
INSTALLATION : Use scissors, knife or die to cut CP1 to the desired size and shape before removing the release liner backing. Next, remove dust, grease, moisture, and other foreign matter from the application surface. Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge. Press the mat firmly into place, using a roller for larger pieces. The roller reduces the risk of leaving air pockets, which reduce CP1'S sound damping capacity. It is more pliable if heated with a hairdryer or heat gun. BEWARE! It gets hot! Heat likely won't be required if installing at or around room temperature. We also recommend sealing all joining edges with 2" wide aluminized foil tape.
REGULAR $ 249 cnd. SALE $ 199 cnd.
FOIL BACK JUTE - JUTE PADDING - OE SOUND DEADENER
1 - CP-1B - 4' X 6' UNIVERSAL SINGLE SIDED ALUMINUM FOIL LAMINATED TO 3/8" JUTE PADDING INSULATION. INSULATES AGAINS HEAT, COLD & NOISE. USED FOR: FLOORS, FIREWALL, INNER DOORS, ROOF, UNDERHOOD, SLEEPERS, VAN WALLS, ENGINE COVERS, GENERATOR COMPARTMENTS FOR CARS, TRUCKS, BOATS AND AIRCRAFT. INSTALLATION: Use scissors or knife to cut to desired shape or size. Can lay on floor under carpet or use contact or spray adhesive to install to vertical or overhead areas.
2 - CP-1BJUTE - 3' X 6' UNIVERSAL 3/8" JUTE PADDING INSULATION INSULATES AGAINS NOISE. USED FOR: FLOORS, FIREWALL, INNER DOORS, ROOF, & HEADLINERS. INSTALLATION: Use scissors or knife to cut to desired shape or size. Can lay on floor under carpet or use contact or spray adhesive to install to vertical or overhead areas.
3 - SW602-SW611 - OE STYLE DIE CUT FLOOR SOUND DEADENER KITS WE HAVE KITS FOR : 67-81 GM F-BODY, 62-74 GM X-BODY, 64-72 GM A-BODY, 66-74 MOPAR A, B, & E-BODY. INSTALLATION: Lay in floor areas as originals were. No need to glue in place.
SOUND DEADENER INSTALLATION SUPPLIES
CP1-2" FOIL TAPE - Used to seal Sound Deadener joints and edges. Resists temperatures up to 120°C.UL723 listed. Aluminum foil tape coated with a very strong and stable adhesive. Ideal for air duct sealing and seams. Industrial Grade and UL 723 listed. Maximum temperature 150°F/65°C. 48mm x 45m.
82725 NORTON Spray Adhesive. A fast drying, super strength adhesive in an aerosol can. Used to bond carpeting, urethane foam, insulation, supported vinyl, wood, paper, hood pads, and headliners to most substrates. Convenient adjustable spray nozzle for varied applications. Ready to Spray.
CSB9003 - Dominion Sure Seal Paintable Seam Sealants are one part, low cost high performance Hi Solid sealants. The cured sealant exhibits very good physical properties including excellent adhesion to a variety surfaces including painted and non painted metal, rubber, glass, wood, concrete. Dominion Sure Seal Sealers are also non staining. They possesses rubber-like characteristics and can be compressed or extended. Used for all sealing and adhesive applications. Dominion Sure Seal Sealers are of a non sag consistency for application with a standard caulking gun in vertical and horizontal joints.
