KBS Klean is a concentrated, water-based, biodegradable formula
that is an excellent alternative to flammable solvents & hazardous
chemicals for preparing your paint job with a clean surface. This
powerful cleaner degreaser will deeply penetrate and remove
stubborn soil from most surfaces without leaving harmful residues
or emitting noxious fumes. Try some today and see why
customers say "...it's not really clean until it's KBS Klean'd"!

2400 - QUART
2500 - GALLON
KBS RustBlast is a powerful rust remover and zinc phosphate
pre-primer and metal etch. RustBlast effectively dissolves rust,
corrosion, metal oxides, and tarnishing from most metal surfaces,
while providing extended protection against flash-rusting thanks
to KBS' unique Oxygen-Block technology. Ideal for removing rust
from chrome surfaces.

3400 - QUART   
3500 - GALLON
RustSeal is a superior one part, ready-to-use, high-solids content, rust
preventive coating, that is actually hardened by exposure to moisture. It is
impervious to road salts and most every chemical. RustSeal flows out to a
beautiful, rock-hard, tough ceramic-like coating that is tough to chip or
scratch, and will not crack or peel. Get some for your project today!
QUART
4401 - GLOSS BLACK
4402 - SATIN BLACK
4403 - SILVER
4406 - RED OXIDE
4407 - GREEN
4415 - GALVANIZED STEEL
The KBS Auto Fuel Tank Sealer Kit contains everything you
need to clean, prep & permanently seal a leaking fuel tank.
Detailed instructions included. Satisfaction guaranteed!

52000 - SMALL TANK ( UP TO 5 GALLONS )       
52050 - MOTORCYCLE TANK ( UP TO 12 GAL )  
53000 - AUTO TANK KIT ( UP TO 25 GALLONS )
BlackTop is a permanent, moisture-cured, UV stable coating
primarily used for topcoating surfaces previously sealed with
RustSeal or any other paint/primer application. BlackTop is a high
performance protective coating specifically formulated to
withstand dulling and fading caused by prolonged sunlight
exposure.
AEROSOL
8101 - GLOSS BLACK
8102 - SATIN BLACK         
QUART  
8401 - GLOSS BLACK
8402 - SATIN BLACK   
An incredibly tough and hard ClearCoat like no other on the market.
This water clear high gloss clear coat remains permanently flexible
and is able to perform in the toughest environments without
yellowing, cracking or peeling.
QUART
8404 - DIAMOND FINISH CLEAR COAT
8408 - DIAMOND FINISH WHITE
This complete kit takes our popular Frame Coater Kit to the next
level. In addition to the complete KBS 3-Step System, this kit
includes a pint of BlackTop topcoat for a permanent final finish
which withstands dulling and fading caused by prolonged sunlight
exposure.
KIT
5750101 - GLOSS BLACK
5750202 - SATIN BLACK
KBS Cavity Coater is a one-step, super-penetrating corrosion
inhibiting coating (CIC) for long term protection on all metal
surfaces. KBS Cavity Coater provides a self healing film which
renders over 4000+ hrs salt spray protection...over 4 times the
protection of conventional cavity waxes.

75100 - AEROSOL
75010 - WAND
KBS Cavity Coater Remover will dissolves and remove excess
KBS Cavity Coater from surfaces and is used to flush out and clean
your KBS Cavity Wand for reuse at a later date. KBS Cavity Coater
Remover is a solvent blend that also works degreasing both oil and
oil-bonded contaminants from surfaces before sealing with Cavity
Coater.

75199 - AEROSOL
Motor Coater is easy to apply, offers superb coverage and yields a
self-leveling professional looking finish brushed or sprayed. These
engine enamels provide deep, rich pigmented colors for excellent
coverage. Your engine will be a show stopper at this DIY price...too
bad it's kept under the hood!
PINT          
60301 - CHEVROLET ORANGE
60309 - FIRE RED
KIT
58002 - GLOSS BLACK
KBS Xtreme Temperature Coating is a high temperature/heat
resistant coating formulated specifically to protect metal surfaces
operating at temperatures from 500° F to 1500° F.
AEROSOL
65100 - ZINC PRIMER
65102 - JET BLACK
65105 - CAST IRON GREY
8 OUNCE   
65202 - JET BLACK
65203 - ALUMINUM
65205 - CAST IRON GREY
PINT      
65302 - JET BLACk  
# 27 – 1410 – 40 th  Ave. N.E. , Calgary , AB. , Canada  T2E 6L1
PH. ( 403 ) 216-6060      Fax ( 403 ) 216-6064
Toll Free 888-486-3833
Make sure to only use KBS #1 Thinner for the thinning of RustSeal
and our other Rust Preventive Paints. Regular solvents may contain
moisture that can adversely affect the performance of our coatings.

Also, keep some KBS #1 Thinner on hand for your immediate clean
up needs.

6200 - 8 OUNCE
6400 -
QUART
Our aircraft strength paint remover sprays as a semi gel coat for fast
and easy coverage. This results in an even, unbroken film which
seals and allows deep penetration through multiple layers of paint.
Due to it’s semi gel state, Strip will cling to vertical surfaces with
minimal run or sag, while offering low-odor technology. Try some
today and see why our customers call KBS Strip "...the best stripper
I've ever used"!

19400 - QUART    
This terrific NEW all-purpose self-etching-primer is ideal for
promoting adhesion between multiple surface coatings (including
applications of topcoats or primers over cured KBS RustSeal) in
addition to priming bare metals such as steel, brass, aluminum, and
most hard plastics.

71003 - PINT       
71004 - QUART  
KBS NuMetal Epoxy Putty is a easy-to-use, two part putty you
simply mix and mold like clay no complicated weighing or
measuring required. Each box contains 1 pound of putty. 1 LB.  

70002 - TAN
70003 - BLACK   
KBS KITS
This kit includes everything you need to restore 4 or more
headlight lenses which drastically increases the visibility of
fogged, yellowed, cloudy, or hazy dull looking headlights and
drastically improves their performance.
KIT
50040 - KIT
verything you need to get started & try out our complete KBS
system! A full 1/2 pint of RustSeal will cover an approx. 12 sq.
ft. area with 2 coats. Experience the quality & durability for
yourself. A KBS best buy! Our complete system in one
package!
KIT
50001 - GLOSS BLACK
50002 - SATIN BLACK
Our quart size 3-Step System kit includes enough products to
Klean, Blast & Seal a full-size car or truck frame, or any 50 sq. ft.
area with 2 coats of paint coverage. Top Quality protection at a
tremendous value! Detailed instructions included.
KIT
57001 - GLOSS BLACK
57002 - SATIN BLACK